Chapter 5 Settings
117
5.3 Machine Setup Menu
This is used to set various operations to ensure optimal machine performance.
l
Machine Setup Menu Screen
MACHINESETUP
AUTOPOWEROFF
30min
TAKE-UPUNIT
>
OFF
MEDIAREMAIN
>><<
MEDIADETECT
>
LANGAGE
>
Two
times
MACHINESETUP
TIME
>
℃
UNIT/TEMP.
mm
UNIT/LENGTH
>><<
KEYBUZZER
ON
CONFIRM.FEED
ON
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
LOCAL
MENU
SETUP
>
>
MAINTENANCE
>
MACHINESETUP
NOZZLECHECK
>
>
INFORMATION
MACHINESETUP
EVENTMAIL
SPACEFEEDMODE
>
NETWORK
>
>
>><<
RESET
>
Machine Setup Menu List
Item
Setting
*1
Details
Auto Power-off None/10 min
to 30 min to
600 min
Sets the time until the power is automatically turned off.
Take-up Unit - Sets the take-up unit operation.
Take-up Unit ON/OFF Set to “OFF” if the take-up unit is not used.
Take-up SW Continuous/
Temporary
Sets the function performed by the ON/OFF button on the take-up
unit in LOCAL mode.
• Continuous: Press the button to start/stop the take-up unit.
• Temporary: The take-up unit operates only while the button is pressed.
The unit stops when the button is released.
Media Remain ON/OFF The remaining roll media amount can be displayed and printed out in
REMOTE mode. The print length will be displayed when leaf media
is in use.
• ON: An input screen appears once the media width is detected.
Press to set the media length.
Press the [FUNC3] key on the “Origin Setup” screen to print the date
and remaining media amount.
• OFF: The remaining media amount is not displayed.
Media Detect - Sets the media width detection method.
DETECTION
TYPE
AUTO/
MANUAL
• AUTO: The media width is automatically detected with the sensor.
• MANUAL: Press to set the media width manually.
When using a media that cannot be detected by the sensor, such as
black cutting sheets, set to "MANUAL".
Use PR Number
Query
ON/OFF Sets whether to display the screen for entering the number of pinch
rollers to be used after media width detection.
• ON: Displays the input screen.
5
To Next Page
Loading...
