MIMAKI UCJV300 Series - Cleaning Print Head Sides and Cleaning the Mist Filter

Chapter 6 Maintenance
138
• Never touch the print head nozzle surface.
Clean the print head sides (dark red area) using
a cleaning stick.
Never touch the nozzle
surface!
Clean using a cleaning stick or soft cloth.
6
Press the [ENTER] key once cleaning is complete.
7
Close the maintenance covers, then press the [ENTER] key.
Cleaning the Mist Filter
The mist filter absorbs the mist generated when ink droplets are discharged from the print head. Continuing
to use it when it is dirty will result in contaminated prints.
Mist filter 1
Mist filter 2
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Head Maint.], then press the [ENTER] key.
• The carriage moves to the maintenance space.