Chapter 6 Maintenance
134
7
Clean the wiper cleaner.
• Wipe off any ink adhering to the wiper cleaner using a cleaning stick moistened with washing
liquid.
• Wipe off the washing liquid. Make sure none remains.
• Only clean the front side of the wiper cleaner. There is no need to clean the backside.
• Do not remove the wiper cleaner from the bracket.
• After cleaning is completed, check to confirm that the wiper cleaner is not facing up.
• Soak up ink in the waste ink holder with a paper towel once a week. Failure to do so may
result in leaking ink.
• Do not remove the absorbent material in the absorbent material case. Doing so may result
in leaking ink.
8
Press the [ENTER] key once cleaning is complete.
9
Close the front cover, then press the [ENTER] key.
Cap Cleaning
The cap prevents the print head nozzle surface from drying out. Continuing to use a dirty cap may affect ink
take-up and lead to print defects (e.g., nozzle clogging, deflection).
• Be careful to avoid leaving fragments from the cleaning stick behind when cleaning. These
fragments will increase the risk of print defects (e.g., nozzle clogging, deflection).
To Next Page
Loading...
