MIMAKI UCJV300 Series - Part Names and Functions - Rear and Right Side View

Chapter 1 Before Using This Product
24
Rear and Right Side View
1 2 3
4
9
8
5
6
7
No. Name Summary
1 Clamp lever (rear) Linked to the clamp lever at the front
2 Media sensor Detects whether media is present. "Media Sensor"(P. 27)
3 Media vacuum exhaust
port
Vacuum exhaust port securing media under vacuum pressure
4 Ink wipe filter Filter for soaking up ink droplets from special ink bottle caps
5 Feed unit Holds the roll media before printing. Compatible with 2-inch and 3-inch
paper rolls
6 AC inlet Used to connect the power cable (provided). "Connecting the Power
Cable"(P. 33)
7 Main power supply
switch
Main power supply for the product To prevent print defects attributable to the
print head (e.g., nozzle clogging, deflection), do not turn off the main power
supply. "Turning On the Power"(P. 33) "Connecting the Power
Cable"(P. 33)
8 LAN port Used when using the network function "Using a LAN Cable"(P. 36)
9 USB port Connects to PC via a USB interface cable. "Using a USB 2.0 Interface
Cable"(P. 36)