MIMAKI UCJV300 Series User Manual

Chapter 6 Maintenance
154
2
Select [TOOL CHANGE], then press the [ENTER] key.
• The cutter unit moves over the platen.
3
Open the front cover.
• The cutter unit can be moved manually. Move the carriage slowly to a position allowing
easy access for replacing the cutter.
4
Replace the media cutter.
(1) Unscrew the cutter screw.
Screw
(2) Remove the cutter.
(3) Attach a new cutter.
(4) Tighten the screw to clamp the cutter.
5
Press the [ENTER] key once replacement is complete.
6
Close the front cover, then press the [ENTER] key.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
Exhaust Fan Filter Replacement
Check the exhaust fan filter condition. Replace if very dirty.

MIMAKI UCJV300 Series Specifications

General

Print Technology	UV-LED inkjet
Max Print Resolution	1200 x 1200 dpi
Power Supply	AC 100-240 V, 50/60 Hz
Ink Type	UV-curable ink
Media Thickness	1 mm or less
Interface	USB, Ethernet
Operating System Compatibility	Windows 10, Windows 8.1, Windows 7
Ink Colors	CMYK, White, Clear