Chapter 6 Maintenance
131
6.2 Daily Maintenance
Maintenance Items and Timing
Timing Item
Every day
• At the end of the
work day
Clean the wiper and wiper bracket. "Wiper Cleaning"(P. 132)
Clean the wiper cleaner. "Wiper Cleaning"(P. 132)
Clean the cap rubber. "Cap Cleaning"(P. 134)
Clean the NCU. "NCU Cleaning"(P. 135)
Clean the underside of the UV-LED lamp. "Carriage Underside
Cleaning"(P. 136)
Clean the underside of the carriage. "Carriage Underside Cleaning"(P. 136)
Mist filter 1
Soak up ink with a paper towel. "Cleaning the Mist Filter"(P. 138)
Clean the media sensor. "Media Sensor Cleaning"(P. 141)
Clean the media holder. "Media Holder Cleaning"(P. 142)
Weekly
• At the end of the
work week
Ink pad in the waste ink holder under the wiper
Soak up ink with a paper towel. "Wiper Cleaning"(P. 132)
Mist filter 2
Soak up ink with a paper towel. "Cleaning the Mist Filter"(P. 138)
Clean the ink discharge channel. "Ink Discharge Channel Cleaning"(P. 141)
Clean the platen. "Platen Cleaning"(P. 143)
Clean the cover (exterior). "Cover (Exterior) Cleaning"(P. 143)
Check the waste ink levels in the waste ink tank.
When noticeably
dirty
Replace with new exhaust fan filter. "Exhaust Fan Filter Replacement"(P. 154)
Replace the exhaust fan BOX.
When not used for
more than a week
Clean the wiper and cap and wash the ink discharge channels. After cleaning, store
without turning off the main power supply. "When Not in Use for Extended
Periods"(P. 143)
6
To Next Page
Loading...
