MIMAKI UCJV300 Series - Items Required for Maintenance and Wiper Cleaning Procedure

Chapter 6 Maintenance
132
Items Required for Maintenance
To order replacement consumable items, contact your local dealer or our service office.
Item Code
F-200/LF-200 Washing Liquid Kit SPC-0569
F-200/LF-200 Washing Liquid SPC-0568
UJ Cleaning Swab SPC-0386
Cleaning Stick for Head Surrounding SPC-0527
Nozzle Swab SPC-0421
Swab 6-axis "S" A101438
Paper towel (KIM TOWEL) SPC-0499
KIMWIPE S-200 SPA-0207
Maintenance cloth SPC-0574
UV goggles SPC-0387
Safety glasses
Gloves
For more information on other consumable items, refer to our website.
https://mimaki.com/supply/inkjet.html
• Do not store in places accessible to children.
Wiper Cleaning
The wiper wipes off ink adhering to the print head nozzle surface. Continuing to use the dirty wiper may
cause the wiper to which dried ink and dust are attached to rub against the nozzle surface, leading to print
defects (e.g., nozzle clogging, deflection).
• Be careful to avoid leaving fragments from the cleaning stick behind when cleaning. These
fragments will increase the risk of print defects (e.g., nozzle clogging, deflection).
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Station Maint.], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.