MIMAKI UCJV300 Series - Copying Temporary Settings and Setup Menu List

Chapter 5 Settings
109
l
To copy “Temporary” settings to Settings 1 to 4
1
In LOCAL mode, select [MENU] > [Setup], then press the [ENTER] key.
• The setting types are displayed.
2
Select [Temporary].
• The Setup menu is displayed. "Setup Menu List"(P. 109)
3
Select [Save setting], then press the [ENTER] key.
• The Select Save Location screen is displayed.
4
Select a save location (Settings 1 to 4). Press the [ENTER] key.
• The save confirmation screen is displayed.
5
Press the [ENTER] key.
• The settings are copied from “Temporary” to the save location.
Setup Menu List
The user can select to prioritize the settings on the machine or the settings on the PC. Setting individual
menus to “HOST” prioritizes PC settings. To prioritize settings for this machine, select a setting other than
“HOST”.
• For more information on how to specify RIP software, refer to the RIP software operating
manual.
Item Setting Details
*1 *2
Feed Comp. -9999 to 0 to
9999
- Corrects the media feed amount.
• Print a pattern and enter the correction amount.
Drop.PosCorrect -40.0 to 0 to
40.0
- Corrects the drop position for bi-directional printing.
• Print a pattern and enter the correction amount.
Logical Seek HOST/ON/
OFF/Media
width
OFF Sets the range of carriage movement.
• OFF: Machine size area
Unidirectional print Bi-directional print
Carriage movement
5