MIMAKI UCJV300 Series - Driver Setup (USB Cable); Installing RIP Software (RasterLink); Obtaining Color Profiles

Chapter 1 Before Using This Product
39
Driver Setup (When Using USB Cable)
1
Install the USB driver.
• Execute [mkcdmenu.exe] contained on the Driver software CD provided.
• The driver can also be downloaded from the following URL:
https://mimaki.com/download/inkjet.html
[UCJV300 Series, 150 Series] > [Drivers/Utilities]
• The driver installation guide is provided within the installer.
Installing RIP Software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Install RasterLink.
• The following icon will appear on the PC desktop once the software is installed.
• For more information, refer to the RasterLink installation guide.
https://mimaki.com/download/software.html
• Once this is installed, activate the license for . Otherwise, “Profile Update” will not start.
Obtaining Color Profiles
Print quality (e.g., tone, bleeding) will vary depending on the media and ink set. To maintain consistent print
quality, select a color profile that suits the media and ink set.
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Launch “Profile Update”.
(1) From the Start menu, select [Mimaki RasterLink6Plus] > [Profile Update].
(2) Click [Next].
1