MIMAKI UCJV300 Series - Waste Ink Tank Replacement Steps

Chapter 6 Maintenance
156
3
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
4
Select [Replace Wasteinktank], then press the [ENTER] key.
• “Replace Wasteinktank Level: 80% (1.6L)” appears on the display.
5
Press to adjust the level.
6
Press the [ENTER] key once adjustment is complete.
Replace the waste ink tank.
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Replace Wasteinktank], then press the [ENTER] key.
• “Replace Wasteinktank Level: 80% (1.6L)” appears on the display.
3
Open the waste ink tank cover.