Chapter 7 Troubleshooting
164
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select “AIR PG”, then press the [ENTER] key.
3
Select the checkbox corresponding to the head to be air-purged. (This does not apply to the
UCJV150 Series.)
• The checked head becomes the air purge target.
• With the 300 Series, you can simultaneously select Head 1 and Head 2.
Ink set Head 1 Head 2
4-color C M Y K Y K M C
6 colors + W C M Y K Lm Lc W W
4 colors + CL + W C M Y K CL CL W W
4 colors + W C C M M Y K W W
4
Press the [ENTER] key.
• The target head moves over the wiper.
5
Open the front cover.
6
Open the lid on the front of the carriage.
• Remove the screw, then slowly lower the lid.
To Next Page
Loading...
