Installation Precautions
17
1
Attach the transportation stays fitted underneath this product.
2
Remove the caster block.
3
Move by grasping the transportation stays.
• Assign at least six persons to move this product. Comply with local regulations when moving the
product.
4
Replace the caster block.
5
Remove the transportation stays.
6
Attach transport stay to the underside of the main unit.
7
Check the following:
"Test Printing"(P. 68)
"Feed Correction"(P. 71)
"Correcting the Drop Position"(P. 73)
To Next Page
Loading...
