Chapter 8 Appendix
183
Item UCJV300 UCJV150
160 130 107 75 160
Reproducibility ±0.2 mm or ±0.1 % of the designated distance, whichever is
greater
Perpendicularity ±0.5 mm/1,000 mm
Media skew Not to exceed 5 mm / 10 m
Printing gap Manual, three settings (2.0, 2.5, 3.3 mm)
Media cutting Cutting precision (steps): Not to exceed 0.5 mm
Origin alignment LED pointer
Ink feed Bottle feed
Washing liquid feed N/A
Waste ink tank Bottle type (2,000 ml)
Take-up unit Switchable between face in and face out
Media heater N/A
NCU (nozzle clogging detection) Provided
UV unit Air-cooled LED UV emitters x2
Image buffer SD-RAM: 2 GB
Interface Data transfer function USB 2.0 Hi-speed, Ethernet 1000BASE-T
Email function Ethernet 10BASE-T/100BASE-TX/1000BASE-T
Commands MRL-V
Languages English, Japanese, Chinese, Turkish, Portuguese
Noise levels At standby Not to exceed 58 dB (FAST-A, 1 m on all sides)
Continuous operation Not to exceed 65 dB
Non-continuous operation Not to exceed 75 dB
Compliance with standards VCCI Class A, FCC Class A, IEC 62368-1 ETL-compliant, CE
marking (EMC Directive, Low Voltage Directive, Machinery
Directive), CB certified, RoHS, REACH, EnergyStar, RCM
marking
Power supply specifications
*6
Single-phase 100 to 120 V AC ±10 % / 12 A, single-phase 200 to
240 V AC ±10 % / 8 A, 50/60 Hz ±1 Hz
Power
consumptio
n
Normal printing -
Sleep -
Installation
environment
*7
Permissible operating
temperature
20 °C to 30 °C
Relative humidity 35 to 65 %Rh (no condensation)
Accuracy guaranteed
temperature
20 °C to 25 °C
Temperature gradient ±10 °C/h or less
Dust
0.15 mg/m
3
(typical office)
Maximum operating
altitude
2,000 m
8
To Next Page
Loading...
