Chapter 2 Printing
51
6.
Load the media.
This machine accepts both roll media and leaf media. "Loading the Media"(P. 59)
7.
Adjust the number and pressure of pinch rollers to use.
Set the appropriate pressure for the set media. "Setting the Pressure and Number of Pinch Rollers to
Use"(P. 67)
8.
Check the state of the print head nozzles.
"Test Printing"(P. 68)
Normal pattern Abnormal pattern
Deflection Nozzle clogging
9.
Clean the head for malfunctioning nozzles.
There are four different head cleaning methods. Choose the head cleaning method based on test print
results. "Head Cleaning"(P. 70)
10.
Adjust the media feed amount.
"Feed Correction"(P. 71)
Second band
First band
Media feed direction
11.
Adjust the drop position for bi-directional printing.
2
To Next Page
Loading...
