Chapter6 Appendix
6-2
Specifications
Machine specifications
Item UJF-7151 plus/UJF-7151 plusII
Print head
Method Drop-on-demand piezoelectric print heads
Specification 6 head staggered
8 head staggered
Resolution
x-dpi: 600, 900, 1200
y-dpi: 600, 1200
x-dpi: 600, 900, 1200,1800
y-dpi: 600, 1200, 1800
Drawing
mode
600 x 600 6, 8, 10 pass
600 x 900 12, 16 pass
1200x1200 12, 16 pass
1800x1800 16, 24pass
Usable inks
Exclusive UV curing ink (Genuine ink)
Bk, C, M, Y, W, P, CL, Lm, Lc, Si (Lm and Lc are for 7151plusII only)
Ink supply Supplying 1L x 6 bottles
Supplying 1L x 8 bottles
Usable media
Size 730 x 530mm (28.7x20.8 in)
Thickness 153 mm (6.0 in)
Weight 10 kg (22.0 lb)
30 kg (66.14 lb)
Max. printing area 710x510 mm (28.0x20.1 in)
Distance accu-
racy
Absolute accuracy
Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
(Whichever the larger one of ± 0.011 in or ± 0.3 % of the designated)
Reproducibility
Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
(Whichever the larger one of ± 0.008 in or ± 0.1 % of the designated)
Perpendicularity ± 0.3 mm/500mm (± 0.011 in/500mm)
Print gap adjustment Table up/down mechanism by key
Head anticollision device
• Head anticollision by obstacle sensor
• Jam sensor to prevent head collision (7151plusII only)
UV unit Water-cooling LED UV device x 1 (equipped with the head slider)
Waste ink tank Bottle type ( 2,000 cc)
Interface
USB 2.0 (Ethernet 10 BASE/ 100 BASE/ 1000 BASE E-mail func-
tion, only “1000 BASE” connection is applicable for drawing.)
Command MRL- V
Noise
during standby Less than 55 dB (A) (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing
*1
*1. Operating Condition: Full load Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
Less than 70 dB (A)
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low
Voltage Directive,Machinery Directive, RoHS Directive), CB Report,
RoHS, ELT marking, UKCA marking
Power Single phase AC100 - 240 V +6% / -10% 50 / 60 Hz ± 1 Hz
Power consumption 1300W or less
Recomended
Environment
Available temp. 15 °C to 30 °C (59 °F to 86 °F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C (68 °F to 77 °F)
Temperature change ± 10 °C / h or less (± 50 °F / h or less)
Dust Equivalent to normal office level
Highest operation height 2000 m (6561.7ft)
Weight (including special stand) 310 kg (683.4 lb) 330 kg (727.5lb)
Outside
dimensions
Width 2200mm (86.6 in) 2203mm(86.7 in)
Depth 1580mm (62.2 in)
Height 1280mm (50.4 in) 1293mm(50.9 in)
To Next Page
Loading...
