MIMAKI UJF-7151 plus - Setup Menu Options

Chapter 3 Setup
3-8
About SETUP MENU
On SETUP MENU, you can set the print conditions to match the media you usually use.
Three
times
MENU
WORK SET
>
> HEAD HEIGHT
>
SET ORIGIN
SET UP
>
>
MAINTENANCE
>><<
SET UP
FEED COMP.
>
ON LOGICAL SEEK
1 INK LAYERS
1
ALL HOST
REFRESH
PRIORITY
>><<
SET UP
UV MODE
ON
OFF WORK CHANGE
AUTOMATIC FAN MODE
BEFORE PRINT
0
AUTO CLEANING
PRINT FLUSHING
>><<
SET UP
MAPS4
AUTO
>
Misregistration adjust
OFF LT mode
>><<
REMOTEMENU
TEST PRINT /
CLEANING
Local
XYZ
0.0 mm 0.0 mm 153.0 mm
REMOTEMENU
TEST PRINT /
CLEANING
Local
XYZ
0.0 mm 0.0 mm 153.0 mm
 SETUP MENUs at-a-glance
Press this to select SETUP
MENU, or to switch to the
previous screen.
Press this to switch to the
next screen.
Use these to select a setting
item.
Press this to confirm a
setting, etc.