3-28
Chapter 3 Setup
Setting reversal direction of JOG X
When setting the origin with the Jog keys, you can specify
the direction in which the table moves by pressing the Up/
Down key.
1
Press the
(MENU)
(>>)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “Reverse JOG-
X”, and press the key.
• The setting of "Reverse JOG-X" is selected.
3
Press to select set value, and
press the key.
• When "ON" is selected, use to move the
table to the back, and to move it to the front.
• When "OFF" is selected, use to move the
table to the front, and to move it to the back.
4
Press the key several times to
end the setting.
Setting the Auto Display Off
The screen can be set to turn off automatically after a
certain period of time (30 minutes).
1
Press the
(MENU)
(>>)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “Auto Display
Off”, and press the key.
• The setting of "Auto Display Off" is selected.
3
Press to select set value, and
press the key.
• When set to "ON", the screen will automatically
turn off after a certain period of time (30 minutes)
has passed since the last keystroke was made.
• When the light is off, press any button on the
control panel to restore it.
4
Press the key several times to
end the setting.
Initializing the Settings
You can return the setting of “SETUP”, “MAINTENANCE”
and “MACHINE SETUP” to the status before shipment.
1
Press the
(MENU)
(>>)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the (<<) key.
3
Press to select “SETUP RESET” ,
and press the key.
4
Press the key.
• The already configured settings are initialized.
5
Press the key several times to
end the setting.
• While the light is off, the excitation of the X- and
Y-axis motors is turned off in order to save power.
• When the light is turned off, the motor excitation is
restored.
To Next Page
Loading...
