MIMAKI UJF-7151 plus - Origin Setup

Chapter 3 Setup
3-5
About ORIGIN SETUP MENU
Common settings are functions for using this machine easily.
The following items can be set in Origin settings.
ORIGIN SETUP MENU table
Function name Set value Outline
X offset (remote) ( P.3-6) 0.0mm~510.0mm Setting the X-axis origin position of online printing. (offset value)
Y offset (remote)) ( P.3-6) 0.0mm~710.0mm Setting the Y-axis origin position of online printing. (offset value)
X offset (local) ( P.3-6) 0.0mm~510.0mm Setting the X axis origin position of the built-in pattern such as test print.
Y offset (local) ( P.3-6) 0.0mm~710.0mm Setting the Y axis origin position of the built-in pattern such as test print.
Z origin ( P.3-6) 0.0mm~153.0mm Setting the Z origin (table height).
(UJF-7151 plusII only) HOST/PLOT
Selects the priority from the settings on this machine (PLOT) or the settings
on a computer (HOST) about head height.
SET ORIGIN
MENU
WORK SET
>
> HEAD HEIGHT
>
SET ORIGIN
SET UP
>
>
MAINTENANCE
>><<
X offset (remote)
0.0mm
0.0mm
Y offset (remote)
X offset (local)
0.0mm
0.0mm
Y offset (local)
153.0mm
Z origin
Two
times
REMOTEMENU
TEST PRINT /
CLEANING
Local
XYZ
0.0 mm 0.0 mm 153.0 mm
REMOTEMENU
TEST PRINT /
CLEANING
Local
XYZ
0.0 mm 0.0 mm 153.0 mm
 SETUP MENUs at-a-glance
Press this to select SETUP
MENU, or to switch to the
previous screen.
Press this to switch to the
next screen.
Use these to select a setting
item.
Press this to confirm a
setting, etc.