3-22
Chapter 3 Setup
Setting event mail function
Set the function to send e-mails to the set e-mail address
when events such as cutting start/ end and stop due to an
error.
Enable the event mail function
1
Press the
(MENU)
(>>)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “EVENT MAIL” ,
and press the key.
3
Press to select “MAIL
DELIVERY” , and press the key.
4
Press to select “ON”, and press
the key.
5
Press the key several times to
end the setting.
Set the event to send an event mail
1
Press the
(MENU)
(>>)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “EVENT MAIL” ,
and press the key.
3
Press to select “SELECT EVENT”
, and press the key.
4
Press to select the "ON" or
"OFF" of the event, then press the
key
.
• Select the ON / OFF of the event in the order
shown in the table below.
After the ON / OFF setting, please proceed to the
next event settings by pressing the [ENTER] key.
• Press the [END / POWER] key when you return to
the previous setting.
5
Press the key several times to
end the setting.
•Disclaimer
• The customer is responsible for the communication fee for
Internet communication such as e-mail notification.
• The notification by the event mail function may not be
delivered due to Internet environment, failure of the device/
the power supply, etc. Mimaki has absolutely no
responsibility for any damages or loss resulting from non-
delivery or delays.
• You can use event mail function by connecting
LAN to this machine. Please prepare for LAN
cable connection beforehand.
• Not compatible with SSL communication.
Event name Outline
PRINT
START
Sets sending/not sending of an email when
printing starts.
PRINT END
Sets sending/not sending of an email when
printing ends.
ERROR
Sets sending/not sending of an email when
printing is stopped due to occurrence of an
error.
WARNING
Sets sending/not sending of an email when a
warning occurs during printing.
OTHER
Sets sending/not sending of an email when an
event other than the above occurs.
To Next Page
Loading...
