MIMAKI UJF-7151 plus - Page 81

Chapter 4 Maintenance
4-9
1
2
2
4
5
6
4
Open the cover.
• In case of UJF-7151 plus, open the left front cover
and H maintenance cover.
• In case of UJF-7151 plusII, open the front cover.
5
Wipe ink sticking to the side of the head off
with a cleaning stick.
• Soak the cleaning stick in the maintenance
cleaning liquid and wipe off an accumulated ink
on the around of the nozzle surface, on the side of
the head and on the bottom surface of the slider.
• Never rub the nozzles.
• Wipe off the ink which attached to the black part
and the gap around the head.
Left front cover
H maintenance cover
front cover
Clean the side of the head (dark gray
area) with a cleaning swab.
The nozzle part (Never
touch it.)
Clean with cleaning stick.
UJF-7151 Plus
• In the case of UJF-7151PlusII, the carriage can be
moved by hand while the cover is open. Move it to
a position that is easy to work with and clean it.
䊦
芎


䠦
芋
Clean the side of the head (dark gray
area) with a cleaning swab.
The nozzle part (Never
touch it.)
Clean with cleaning stick.
hand mirror
UJF-7151 PlusII
Put a hand mirror on the table and work while looking in the
mirror.
Black part
Do not touch
the nozzle surface
Gap around
the head