33 - 4 BeneVision N Series Patient Monitor Operator’s Manual
33.3.1.3 Hemodynamic Parameters from CCO/SvO
2
module
The following table lists the hemodynamic parameters from the Vigilance II, Vigileo, EV1000, and HemoSphere
monitors.
Abbreviation Full Spelling Unit Applicable Device
Output CCO Continuous Cardiac Output L/min All
CCI Continuous Cardiac Index L/min/m
2
All
C.O. Cardiac Output L/min Vigilance II, EV1000,
HemoSphere
CI Cardiac Index L/min/m
2
Vigilance II, EV1000,
HemoSphere
SV Stroke Volume ml All
SVI Stroke Volume Index ml/m
2
All
PR Pulse Rate bpm EV1000
Contractility ESV End Systolic Volume ml Vigilance II
ESVI End Systolic Volume Index ml/m
2
Vigilance II
RVEF Right Ventricular Ejection
Fraction
% Vigilance II,
HemoSphere
GEF Global Ejection Fraction % EV1000
CFI Cardiac Function Index l/min EV1000
Preload Volume HR Heart Rate bpm Vigilance II
CVP
C
entral Venous Pressure cmH
2
O, kPa, or mmHg All
MAP Mean Arterial Pressure mmHg or kPa Vigilance II,
HemoSphere
EDV End Diastolic Volume ml Vigilance II
EDVI End Diastolic Volume Index ml/m
2
Vigilance II
SVV Stroke Volume Variation % Vigileo, EV1000
GEDV Global End Diastolic Volume ml EV1000
GEDI Global End Diastolic Volume
Index
ml/m
2
EV1000
ITBV Intrathoracic Blood Volume ml EV1000
ITBI Intrathoracic Blood Volume
Index
ml/m
2
EV1000
PPV Pulse Pressure Variation % HemoSphere
Afterload SVR Systemic Vascular Resistance DS/cm
5
or kPa-s/l All
SVRI Systemic Vascular Resistance
Index
DS•m
2
/cm
5
or kPa-s-m
2
/l All
eArt-S Systolic Arterial Pressure from
the EV1000 monitor
mmHg or kPa EV1000
eArt-M Mean Arterial Pressure from
the EV1000 monitor
mmHg
or kPa EV1000
eArt-D Diastolic Arterial Pressure
from the EV1000 monitor
mmHg or kPa EV1000