Mindray BeneVision N15 Operator's Manual

BeneVision N Series Patient Monitor Operator’s Manual D - 3
D.1.8 CO
2
Physiological Alarm Messages
D.1.9 AG Physiological Alarm Messages
D.1.10 RM Physiological Alarm Messages
D
.1.11 EWS Physiological Alarm Messages
D.2
1. N represents a number.
2
. XX represents RR, SpO2, Temp, BP-S, BP-D, BP-M, HR, EtCO2, or FiO2.
Technical Alarm Messages
This section lists technical alarms, their default priority, indication on alarm reset, and the actions that can be
taken when an alarm occurs.
Technical alarms give different alarm indicators when the alarm system is reset. In this section we classify
the technical alarms into three categories for easy clarification:
■ A: technical alarms are cleared. The monitor gives no alarm indications.
■ B: technical alarms are changed to the prompt messages.
■ C: the alarm is silenced and a √ appears before the alarm message, indicating that the alarm is
acknowledged.
In the following tables we will use A, B, and C to refer to the indications on alarm reset.
Alarm message Default priority Cause and solution
FiO2 Shortage High FiO
2
concentration is less than18%. Check the patient’s condition, the
ventilated O
2
content and the CO
2
connection.
Alarm message Default priority Cause and solution
FiO2 Shortage High Check the patient’s condition, the ventilated O
2
content and the AG
connections.
Mixed Agent and MAC≥3 Med The mixed anaesthetic gases concentration is too high. Adjust the
anaesthetic gases concentration.
Apnea High The respiration signal was so weak that the monitor cannot perform
respiration analysis. Check the patient’s condition, module and patient
connections.
Alarm message Default priority Cause and solution
Apnea High The respiration signal was so weak that the monitor cannot perform
respiration analysis. Check the patient’s condition, module and patient
connections.
Alarm message Default priority Cause and solution
EWS Score > N
1
High/Mediate The total score exceeds the configured alarm limit. Check the patient
condition.
XX
2
score is 3 Mediate The parameter score is 3. Check the patient condition.

Mindray BeneVision N15 Specifications

General

Brand	Mindray
Model	BeneVision N15
Category	Medical Equipment
Language	English