Mindray BeneVision N15

BeneVision N Series Patient Monitor Operator’s Manual C - 21
C.1.19 rSO
2
Default Settings
C.2 Routine Default Settings
C.2.1 Alarm Default Settings
Block Recovery Off
Stimulation Beep Volume 2
Interval TOF Mode: 1 min
ST Mode: 10 sec
DBS Mode: 1 min
DBS Mode 3.3
Item Default Setting
Item Default Setting
rSO
2
-1/rSO
2
-2/
rSO
2
-1’/rSO
2
-2’
Alarm switch On
High limit 90
Low limit 40
Priority Med
Alarm Outputs Off
rSO
2
-1/rSO
2
-2/
rSO
2
-1’/rSO
2
-2’
Variance
Low Limit -20
Auto Low Limit Off
rSO
2
-1 Label L
rSO
2
-2 Label R
rSO
2
-1’ Label S1
rSO
2
-2’ Label S2
AUC Mode Below Base Percentage
Fixed Threshold 50
Percentage Below Baseline 25
Select Parameter Baseline, Baseline Variance
Item Default Setting
Alarm Volume 2
High Alarm Volume Alarm Volume + 2
Reminder Volume 2
Apnea Delay Adult: 20 sec
Pediatric: 20 sec
Neonate: 15 sec
Printing Duration 20 sec