BeneVision N Series Patient Monitor Operator’s Manual A - 5
A.4.2.2 N17/N15/N12/N12C Battery Specifications
A.5 Display Specifications
A.6 Touchscreen Specifications
A.7 Recorder Specifications
A.8 LEDs
Battery type Rechargeable lithium-Ion battery
Voltage 11.1 VDC
Capacity 4500 mAh
Run time At least 2 hour for N17/N15
At least 4 hour for N12/N12C
when the monitor is powered by a new fully-charged battery at 25 ºC±5 ºC
with 5-lead ECG and SpO2 cable connected, auto NIBP measurements at an
interval of 15 minutes, and screen brightness set to 1.
Shutdown delay: at least 15 minutes after the low battery alarm first occurs
Charge time No more than 4.5 hours to 90% when the monitor is off
No more than 10 hours to 90% when the monitor is on
Screen type Medical-grade color TFT LCD
Screen Size (diagonal) N22: 22 inches
N19: 19 inches
N17: 18.5 inches
N15: 15.6 inches
N12/N12C: 12.1 inches
Resolution N22/N19: 1680 x 1050 pixels
N17/N15: 1920 x1080 pixels
N12/N12C: 1280 x 800 pixels
Screen type Capacitive, multi-point touch
Method Thermal dot array
Horizontal resolution 16 dots/mm (25 mm/s paper speed)
Vertical resolution 8 dots/mm
Paper width 50 mm
Paper length 20 m
Paper speed 25 mm/s, 50 mm/s
Accuracy: ±5%
Number of waveform channels A maximum of 3
Alarm lamp 1 (three color-coded: red, yellow, and cyan)
Power-on LED 1 (green)
AC power LED 1 (green)
Battery LED 1 (two color-coded: yellow and green)
To Next Page
Loading...
Need help?
General
