BeneVision N Series Patient Monitor Operator’s Manual 2 - 5
2.3.2.1 N22, N19 Integrated Primary Display
The primary display can be installed with or separately from the main unit, either horizontally or vertically.
The following picture shows the indicators and connectors on the primary display when it is installed with the
main unit.
(1) Alarm lamp:
When a physiological alarm or technical alarm occurs, this lamp lights and flashes corresponding with the alarm
priority:
â—† High priority alarms: the lamp quickly flashes red.
â—† Medium priority alarms: the lamp slowly flashes yellow.
â—† Low priority alarms: the lamp lights in cyan without flashing.
To Next Page
Loading...
Need help?
General
