Mindray BeneVision TM80 Service Manual

TM80 Telemetry Monitor Service Manual 3-99
2 AP
capabilit
y
1,The anticipated
number of devices
connecting to one
AP must be lower
than the AP
capability ,and
capability should has
a margin of 50%. For
example, In the
coverage of one AP,
the typical number of
devices connected to
this AP is 16, then
the announced
number of devices
than can connect to
AP simultaneously
must be more than
32.
2, The AP Can create
several SSIDs.
Service personnel get the
AP model from related
hospital people or observe
directly. According to the
model, get the data sheet of
AP to make sure the
capability.
3 Device
density
The maximum
number of devices
connected to one AP
simultaneously is 16
(including TM80 and
other devices).
Check with hospital IT if this
requirement is met or not.
4 AP
compati
bility
When customer
using Aps not from
Cisco, compatibility
test should be passed
Mindray or Mindray’s agent
service engineer uses a
TM80 to confirm in advance.
Refer to3.10network survey
with TM80, Set TM80 to

Mindray BeneVision TM80 Specifications

General

Brand	Mindray
Model	BeneVision TM80
Category	Monitor
Language	English