3-16 TM80 Telemetry Monitor Service Manual
The specified requirement for FreeRADIUS:
The supported algorithm used to encrypt the keys of CA and User Cert:
3DES, AES128, AES256
The requirement for DH file on FreeRadius:
1. The number bits of the DH file should be: 512, 1024, 2048
2. The DH file should not be generated with dsaparam.
3. The DH file size should less than 2K bytes
Specified requirements:
The specified requirement for ACS:
On the page of Access Policy ->Access Services->Allowed Protocols
NOTE
DO NOT check both "Send Crypto binding TLV" and "Allow PEAPv0
only for legacy clients".
To Next Page
Loading...
Need help?
General
