TM80 Telemetry Monitor Service Manual 3-27
3.3.3.5 Advanced Settings
On the page, various advanced WLAN settings can be configured, including
disabling coverage hole detection, disabling customer exclusion, disabling load
balancing, and enabling Off Channel Scan.
1. Choose WLANs→WLAN ID→Advanced. The configuration page is displayed.
2. Perform the following configuration on the page.
Coverage Hole detection=Enabled
Enable Session Timeout=Disabled
Aironet IE=Enabled
Customer Exclusion=Disabled
Scan Defer Priority=Enable only 6 and 7
Scan Defer Time(msecs)=2000
DHCP Server(override)=Disabled
DHCP Addr. Assignment=Disabled
Management Frame Protection(MFP)=Disabled
802.11a/n(1-255)=1
802.11b/g/n(1-255)=1
Customer Load Balancing=Disabled
Customer Band Select=Disabled
The figures below show the specific Advanced configuration.
To Next Page
Loading...
