3-42 TM80 Telemetry Monitor Service Manual
The figure below shows the specific configuration.
2. Click Apply and reboot, and Save Configuration
3. Choose Configuration>Wireless>AP Configuration>RF
Management>802.11a radio>Adaptive Radio Management, Perform the
following configuration on the Basic page:
Assignment=single-band
Allowed bands for 40Mhz channels=None
80Mhz support=disable
Max Tx EIRP=127
Min Tx EIRP=3
Client Match=disable
The figure below shows the specific configuration.
4. Click Apply and reboot, and Save Configuration
To Next Page
Loading...
