Mindray BeneVision TM80 Service Manual

TM80 Telemetry Monitor Service Manual 3-47
The figure below shows the specific configuration.
3. Click APPLY in the lower right corner to save the setting.
 Time Settings
1. Choose Configuration→System→Basic→Time. The configuration page
is displayed.
2. Perform the following configuration on the page.
 Time Zone=USA-Pacific
 NTP Client=Enable
 Use Custom NTP Server=Enable
NOTE
 Select a time zone according to the country where the network is built.

Mindray BeneVision TM80 Specifications

General

Brand	Mindray
Model	BeneVision TM80
Category	Monitor
Language	English