3-72 TM80 Telemetry Monitor Service Manual
The TM80 only supports certificates in PEM format. If you need to use certificates in
other formats, you need to convert the certificates before importing them into the
TM80. The openssl tool (version 1.0.2c or later) is recommended for the conversion,
and you can get the setup file on internet conveniently.
openssl tool preparation consists of two steps: installing an openssl tool and
configuring environment variables.
Installing an openssl tool
You can install the openssl tool as default. Win32OpenSSL-1_0_2c.exe is taken as an
example.
1. Click the setup file to start.
2. Click Next to continue.
3. Select "I accept.." and click Next to continue.
4. Select the install path and click Next to continue
5. Click Next to continue until setup is finished.
To Next Page
Loading...
