3. ADFR
• Make the necessary adjustments of ADFR.
Note:
• For details, see Option service manual.
4. Scan-through ADF
• Make the necessary adjustments of AFR.
Note:
• For details, see Option service manual.
Touch Panel
Display
Setting (The default is ).
Original Stop
Position
Adjust the document stop position in each of the ADF modes.
Registration Loop Set the length of the loop to be formed in the original fed off the ADF
before the Registration Roller.
Touch Panel
Display
Setting (The default is ).
Registration Adjust registration in the main and sub-scanning directions of the
ADF.
Zoom Adjust Adjust the scanning zoom ratio in the main and sub-scanning direc-
tions of the ADF.
Highlighted
-7............................................. ............................................+7
Smaller Greater
0
-5 mm...................................... .....................................+5 mm
Smaller Greater
0
Highlighted
Main Scanning (CD)
SubScanning(FD)
-72 dot..................................... ....................................+72 dot
Smaller Greater
-127 dot................................... ..................................+127 dot
Smaller Greater
0
0
0.990....................................... .......................................1.000
Reduction direction Enlargement direction
0
To Next Page
Loading...
