Mitsubishi Electric MELSEC-Q Series - System Configuration of the IP Packet Transfer Function

107
CHAPTER 4 FUNCTIONS
4
4.3 IP Packet Transfer Function 4.3.1 System configuration of the IP packet transfer function
4.3.1 System configuration of the IP packet transfer function
Connect an Ethernet device to an Ethernet port on a Built-in Ethernet port QCPU.
Note, however, that a Universal model QCPU (excluding the Q00UJ, Q00U, Q01U, and Q02UCPUs) other than a
Built-in Ethernet port QCPU can be also connected to a CPU module that is not directly connected to an Ethernet
device.
Ethernet device
(request source device)
Ethernet device
(request destination device)
Only Built-in Ethernet port QCPU can be used.
(Directly connect it to an Ethernet device.)
A Universal model QCPU excluding the Q00UJ, Q00U, Q01U,
and Q02UCPUs can be used when it is not directly
connected to an Ethernet device.