Mitsubishi Electric MELSEC-Q Series - Illegal Network no

561
CHAPTER 10 TROUBLESHOOTING
10
10.4 Checking the Error Description with the CC IE Control Diagnostics 10.4.10 Illegal network No.
10.4.10 Illegal network No.
The following explains the procedures to be taken when network No. is incorrectly set.
(1) When a programming tool connected station is faulty
Select the own station.
The station No.4 is disconnected.
Control
station
No.1
Normal station
No.2
Normal station
No.4
Network No.1
Set to the network No.2
Normal station
No.3
Selected
station