531
CHAPTER 10 TROUBLESHOOTING
10
10.3 CC IE Control Diagnostics
10.3.2 Select station network device status display
10.3.2 Select station network device status display
The detailed information of the selected station is displayed.
A module is selected here. For selection of a board or terminal display, refer to the relevant manual.
(1) Description of select station network device status display
Item Description Display content
Group No. Displays a group number of the selected station. 0 to 32
Shared Group No. Displays a shared group number of the selected station. 0 to 120
Mode Displays the mode of the selected station.
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test
Test between Station
IP address
Displays the IP address. (This applies only when the address is set to
the control station.)
• Control station: Value set with
GX Works2
• Normal station: Value
automatically assigned from
the control station
• When the address is not set:
-.-.-.-
Network Type Displays a type of the selected station.
CC IE Control Ext. Mode
CC IE Control
Operating status
Normal operation
Operation error (data link continued) (yellow)
Operation error (data link discontinued) (red)
Select station network device
status display
Page 148, Section 5.3 (1)
To Next Page
Loading...
