Mitsubishi Electric MELSEC-Q Series - Part Names

147
CHAPTER 5 PREPARATION AND SETUP
5
5.3 Part Names
5.3 Part Names
This section describes each part and name of the CC-Link IE Controller Network module.
No. Name Description
1) Indicator LED
Indicates the operating status of the CC-Link IE Controller Network module. (
Page 148,
Section 5.3 (1))
2) IN connector
Used to connect an optical fiber cable to the CC-Link IE Controller Network module. The cable is
connected to OUT connector of another station. (
Page 149, Section 5.3 (3))
3) OUT connector
Used to connect an optical fiber cable to the CC-Link IE Controller Network module. The cable is
connected to IN connector of another station. (
Page 149, Section 5.3 (3))
4)
External power supply terminal
block
Indicates the operating status of the CC-Link IE Controller Network module. (
Page 148,
Section 5.3 (1))
5) Serial number plate Indicates the serial No. of the rating plate.
5)
4)
3)
2)
1)
2)
5)
3)
1)
QJ71GP21S-SXQJ71GP21-SX