533
CHAPTER 10 TROUBLESHOOTING
10
10.3 CC IE Control Diagnostics
10.3.3 Logging
10.3.3 Logging
The history for the communication path switching and transient transmission error can be monitored and the error
information can be cleared.
Note that these operations are not available in circuit test mode.
1. Open the "CC IE Control Diagnostics" window. ( Page 526, Section 10.3)
2. Click the button.
3. Perform the operation with reference to the description below.
(1) "Monitor Details" tab
The history for the communication path switching and transient transmission error is displayed.
To Next Page
Loading...
