Mitsubishi Electric MELSEC-Q Series - Own Station No. Is out of Range

549
CHAPTER 10 TROUBLESHOOTING
10
10.4 Checking the Error Description with the CC IE Control Diagnostics 10.4.5 Own station No. is out of range
10.4.5 Own station No. is out of range
The following explains the procedures to be taken when a station has a station No. that is larger than the total number
of stations in a network.
The total number of stations in a network is limited to four.
(1) When a programming tool connected station is normally operating
Select the own station.
An error has occurred in the station No.8.
Select the station No.8.
Click the error details button.
The Error Factor field indicates that the station No.8 is larger than
the total station No. per network.
Take corrective actions according to the troubleshooting.
Control
station
No.1
Normal station
No.2
Normal station
No.8
Normal station
No.3
Selected
station
Control station
No.1
Normal station
No.2
Normal
station
No.8
Normal station
No.3
Selected
station