Mitsubishi Electric MELSEC-Q Series - Appendix 5.5 Interrupt Setting Parameter Sheet

659
APPENDICES
A
Appendix 5 Parameter Sheet Appendix 5.5 Interrupt setting parameter sheet
Appendix 5.5 Interrupt setting parameter sheet
Network No.
Station No.
No.
Device
Code
Device No.
Detection
Method
Interrupt
Condition
Word Device
Setting Value
Channel No./
Connection No.
Interrupt
(SI) No.
Device
Code
Setting range
Device
No.
Detection Method Interrupt Condition
Word Device
Setting Value
Channel No./
Connection No.
Interrupt
(SI) No.
LB 0 to 7FFF At ON: Level Detect + ON
At OFF: Level Detect + OFF
At rising: Edge Detect + ON
At falling: Edge Detect + OFF
—
—
0 to 15
LX 0 to 1FFF
SB 0 to 1FF
LW 0 to 1FFFF At value match: Level Detect + Equal
At value mismatch: Level Detect + Unequal
At value match (the first time only): Edge Detect + Equal
At value mismatch (the first time only): Edge Detect +
Unequal
0 to 65535
SW 0 to 1FF
RECVS
instruction
— Edge Detect (Fixed) Scan Completed (Fixed) — 1 to 8
1
2
3
4
5
6
7
8
9
0