Mitsubishi Electric MELSEC-Q Series - Own Station No. Duplication

553
CHAPTER 10 TROUBLESHOOTING
10
10.4 Checking the Error Description with the CC IE Control Diagnostics 10.4.7 Own station No. duplication
10.4.7 Own station No. duplication
The following explains the procedures to be taken when station No. is duplicated.
(1) Turning ON all stations simultaneously
(a) When a programming tool connected station is normally operating
Selected
station
Select the own station.
Multiple stations with the station No.3 are displayed, indicating that the
same station No. is used for multiple stations. Change the station No.
Control
station
No.1
Normal station
No.2
Normal station
No.3
Normal station
No.3