Mitsubishi Electric MELSEC-Q Series - Setting and Communication Contents

288
8.2.2 Setting and communication contents
Consider each station send range of LB/LW and set the parameters.
Using the parameter sheet is helpful for considering each station send range of LB/LW and parameters. ( Page
645, Appendix 5)
Before considering parameters of each station, consider each station send range of LB/LW with the link device
assignment sheet. ( Page 650, Appendix 5.1)
Ex.
Filling in link device assignment sheet
Consider parameters of the CC-Link IE Controller Network module based on the contents of the link device
assignment sheet.
Station
No.
Data description Assignment link device
Send source Send target Link relay (LB) Link register (LW)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
1
2