Mitsubishi Electric MELSEC-Q Series - Own Station Is Set as Reserved Station

551
CHAPTER 10 TROUBLESHOOTING
10
10.4 Checking the Error Description with the CC IE Control Diagnostics 10.4.6 Own station is set as reserved station
10.4.6 Own station is set as reserved station
The following explains the procedures to be taken when a station set as a reserved station exists in the actual network.
Station No.4 is assumed to be set as a reserved station.
(1) When a programming tool connected station is normally operating
Select the own station.
An error has occurred in the station No.4.
Select the station No.4.
Click the error details button.
The Error Factor field indicates that the station No.4 has been set as a
reserved station.
Take corrective actions according to the troubleshooting.
Control
station
No.1
Normal station
No.2
Normal station
No.4
Normal station
No.3
Selected
station
Control station
No.1
Normal station
No.2
Normal
station
No.4
Normal station
No.3
Selected
station