Mitsubishi Electric MELSEC-Q Series - Network Components; Order of Optical Fiber Cables (Optional)

38
2.2 Network Components
The CC-Link IE Controller Network consists of the following.
2.2.1 Order of optical fiber cables (Optional)
Optical fiber cables with connectors are available from Mitsubishi Electric System & Service Co., Ltd. (Catalogs of
the optical fiber cables are also available.)
In addition, on-site connector polishing, terminal assembly, and fusion splicing is available.
Please consult your local Mitsubishi representative.
● For CC-Link IE Controller Network modules, 2-core cables are used.
● Optical fiber cables used for MELSECNET/H modules or MELSECNET/10 modules cannot be used for CC-Link IE
Controller Network modules.
Remark
● The following types of optical fiber cables are available.
A type: Cable for connection inside control panel
B type: Cable for connection between control panels inside a building
C type: Cable for outdoor connection
D type: Reinforced cable for outdoor connection
● There are special cables available for moveable applications and resistance to heat. Contact your Mitsubishi Electric
System & Service for details.
Type Model (Manufacturer)
Multimode fiber (GI) QG series (Mitsubishi Electric System & Service Co., Ltd.)