534
*1 Up to 100 logs are displayed, and when the maximum is reached, they will be erased in sequence from the oldest one.
Note that when the window is closed, logs numbered 17 or higher are deleted. To retain them, click on the Save error
log.
*2 If a transient transmission error is detected during start-up of the CC-Link IE Controller Network module, the time of the
error may be displayed as blank.
Item Description
Display Station Displays the network No., group No., and station No. of the connected station.
Switch Transmission Path
*1
Loop Status Displays the status of a loop.
Loop station Displays a station where loopback occurs at IN-side and OUT-side at loopback.
Occurrence Date Displays a time when a communication path is switched.
Transient Transmission
Errors
*1
Error Code
Displays error codes. ( Page 511, Section 10.2)
Target Network Displays network No. of the station where an error was detected.
Target Station No. Displays station No. of the station where an error was detected.
Occurrence Date
*2
Displays a time when a transient transmission error is detected
Save Error Log Saves the description of monitor detail in CSV file.
To Next Page
Loading...
