Mitsubishi Electric MELSEC-Q Series - Page 562

560
(2) Adding station to a network
(a) When a programming tool connected station is normally operating
(b) When a programming tool connected station is faulty
Select the own station.
There are multiple control stations with the same station No.
Change the network type and station No.
Control
station
No.1
Normal station
No.2
Control station
No.1
Normal station
No.3
Selected
station
Added station
Select the own station.
There are multiple control stations with the same station No.
Change the network type and station No.
Control station
No.1
Normal station
No.2
Control
station
No.1
Normal station
No.3
Selected
station
Added station