184
LX/LY Setting(1)
For each block, set an I/O master station and I/O ranges used in communication using LX/LY
between the I/O master and relevant stations.
( Page 192, Section 6.3.2)
LX/LY Setting(2)
Specify I/O Master Station
Shared Group Setting
For a Universal model QCPU, set stations that will share their cyclic data to the same shared
group No. ( Page 196, Section 6.3.3)
Pairing
When the network contains a redundant system, set a combination of stations of system A
and system B. ( Page 199, Section 6.3.4)
Specify Reserved Station
Set reserved station(s). ( Page 200, Section 6.3.5)
Supplementary Setting
Set the constant link scan time, block data assurance per station, punctuality assurance, and
the maximum number of transient transmissions for one station.
( Page 201, Section 6.3.6)
Item Description
To Next Page
Loading...
