Mitsubishi Electric MELSEC-Q Series - Page 189

187
CHAPTER 6 PARAMETER SETTING
6
6.3 Network Range Assignment 6.3.1 LB/LW settings
5. Equal assignment is done in "LB/LW Setting(1)" of "Network Range Assignment".
(3) Using identical point assignment
The same points can be assigned to each station's send range in LB/LW.
1. Specify the number of assignment points and click the button in the "Assignment the
CC IE Control Network Range" window.
2. Each station's send range in LB/LW are assigned by the same number of points.
Ex.
When assigning 512 points to each station's send range in LB/LW