Mitsubishi Electric MELSEC-Q Series - Page 297

295
CHAPTER 8 PROGRAMMING
8
8.2 Program Example of a Multi-network System 8.2.2 Setting and communication contents
(b) Network range assignment (set in control station (2M
P
1))
1. Determine network range assignment.
The network range assignment and supplementary setting of the control station (2M
P
1) are the same as
those of the control station (1M
P
1). ( Page 289, Section 8.2.2 (1))
2. Complete settings in the programming tool based on the contents filled in the parameter sheet.
• Network range assignment (Control station (2M
P
1))
• Supplementary setting (Control station (2M
P
1))