330
(b) When CPU No. is specified for Target station's CPU type of the instruction
The instruction is not executed on a station where the CPU No. of the control CPU is different from the one
specified for Target station's CPU type. (Note that no error will be detected on the request source.)
1 21 2 1122
Control CPU setting
Since the control CPU of the CC-Link IE Controller Network module is No.2,
the instruction to multi-CPU No.1 is not executed.
When executing WRITE instruction
under the following conditions:
Target station's CPU type
Multi-CPU No.1(03E0
H)
Target station No.
All stations (FF
H)
To Next Page
Loading...
