Mitsubishi Electric MELSEC-Q Series - Page 375

373
CHAPTER 9 DEDICATED INSTRUCTIONS
9
9.6 JP/GP.SWRITE (Data Write to Programmable Controllers on Other Stations)
(d) Program example
• Program example for the SWRITE request source (station No.2)
• Program example for the SWRITE request target (station No.3)
Control data setting
for SWRITE instruction
Stores write data
in D750 to D753.
Execution of SWRITE
instruction
Error code reading,
etc.
Processing program for write completion
Processing program for normal completion
Processing program for error completion